Product Sheet

Download PDF

524103

K12

  • Square luminaire for installation in wall and ground - recessed.
  • Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content). Glass diffuser fixed to the aluminium body through a robotic gluing system.
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP67
  • In compliance with EN 60598-1 standards
  • Class of insulation: III
  • Installation: the luminaire is equipped with 300mm of cable for a quick connection. K12 Power LED is equipped with a dc/dc highly efficient converter that removes electromagnetic interference and allows parallel wiring. The whole range is protected against polarity reversal and sudden voltage peak. Outdoor use requires suitable flexible cables. Installation requires a dedicated box to be ordered separately. It is important to provide a >200mm gravel layer or a drain system (for concrete surface) to ensure good drainage and to avoid water stagnation.
  • We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
Warnings
Ground Recessed
Wall Recessed
K12ln Mid-Power LED / Diffused light

Light Flux
Placement
Product Code Details
524103
Light Source
WARM WHITE 3000K MID-POWER LEDs 7,8W/24Vdc
Total power 10,5W
LED lm 1161 ≠ OUTPUT lm 578
CRI>80

Remote electronic power supply to be ordered
Dimmable on request, acc.: 144,176

Download ENERGY LABEL

Photometry Image not Available Download Photometry:
524103_MID-LED-1_20170314.IES 524103_MID-LED-1_20170314.LDT
Installation Data Sheets (of the product and of its accessories) ARES_K12_manual.pdf

Download Technical Drawing: k12ln.dwg

Accessories

Code: 183

Box for installation

322 x 70 x H 95 mm

Code: 153

Suction cup to pull the luminaire

Code: 144

Supported n. of lamps: 1
Power supply

17W/110÷240V - 24Vdc
(15W@110V) IP20 CLASS II SELV.

Code: 176

Supported n. of lamps: 1
Power supply

17W/110÷240V - 24Vdc
(15W@110V) IP67 CLASS II SELV.

Code: 147

Supported n. of lamps: 1
Power supply

20W/220÷240V - 24Vdc
IP67 CLASS II SELV.

Code: 155

Supported n. of lamps: 4
Power supply

50W/120÷240V - 24Vdc
IP67 CLASS II SELV.

Code: 110

Supported n. of lamps: 6
Power supply

70W/220÷240V - 24Vdc
IP67 CLASS II SELV EQ.

Code: 156

Supported n. of lamps: 9
Power supply

100W /120÷240V - 24Vdc
IP67 CLASS II SELV.