Product Sheet

Download PDF



  • Rectangular luminaire for installation in the wall - recessed.
  • Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content). Glass diffuser: sandblasted with silkscreen border, fixed to the aluminium structure through a robotic gluing system.
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP65
  • In compliance with EN 60598-1 standards
  • Class of insulation: mains: I; LED module: I, III; RGB: III
  • Installation: Electrical components housed into the removable back side. Wiring through two M16 cable glands for (4,5 10mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Installation requires a dedicated box to be ordered separately.

Available Colors for this Version
1. white 6. grey
3. anthracite 4. black
18. deep brown
Wall Recessed
Camilla Mid-Power LED / L 230 mm - Diffused light

Light Flux
Product Code Details
Light Source
Total power 7W
lm LED 557 ≠ lm OUTPUT 112
CRI >80

Integral electronic power supply


Photometry Image not Available Download Photometry:
115147113_MID-LED_20180910.IES 115147113_MID-LED_20180910.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Camilla_manual.pdf

Download Technical Drawing: camilla-l230.dwg


Code: 123

Box for installation

255 x 110 x H 95 mm

Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66