Product Sheet

Download PDF

528004

New Torcia

  • Cylindrical light for installation on wall or as a bollard light.
  • Configuration: stainless steel top disc, turned aluminium junction, extruded aluminium pole and die-cast aluminium base, EN AB-47100 alloy (low copper content). Polycarbonate diffuser: LED: opal; fluorescent: transparent with metal antiglare louvre. Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP65
  • In compliance with EN 60598-1 standards
  • Class of insulation: I
  • Installation: the luminaire is equipped with a piece of cable with a 2-way connector for 3-conductor cables for an easyto- make connection. New Torcia LED: direct connection to the mains. Outdoor use requires suitable flexible cables. Pole with base: direct fixation with bolts to a concrete surface or through a dedicated fixing plate (to be ordered separately) in a concrete basement; Pole in-ground: for a better stability, we recommend to concrete the root of the pole.
  • We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.


Available Colors for this Version
1. white 6. grey
3. anthracite 4. black
18. deep brown
Warnings
Bollard
Wall
New Torcia Mid-Power LED / Wall Version

Light Flux
Placement
Product Code Details
528004
Light Source
NATURAL WHITE 4000K MID-POWER LEDs 8W/220√∑230V
Total power 9W
LED lm 740 ≠ OUTPUT lm 665
CRI >80

Led module set up to work directly connected to the mains
 

Download ENERGY LABEL

Download Photometry:
528004_MID-LED-230V_20170314.IES 528004_MID-LED-230V_20170314.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Newtorcia_manual.pdf

Download Technical Drawing: newtorcia-w.dwg

Accessories

Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66

Code: 1505

Pole with base

H 500 mm
Combinable with Base plate and fixing bolts, code 21

Code: 1509

Pole with base

H 900 mm
Combinable with Base plate and fixing bolts, code 21

Code: 1512

Pole with base

H 1200 mm
Combinable with Base plate and fixing bolts, code 21

Code: 1605

In-Ground Pole (+300 mm Root)

H 500 (+300) mm

Code: 1609

In-Ground Pole (+300 mm Root)

H 900 (+300) mm

Code: 1612

In-Ground Pole (+300 mm Root)

H 1200 (+300) mm

Code: 21

Base plate and pole fixing bolts

174 x H 200 mm