Product Sheet

Download PDF

4927800

Memi

  • Luminaire for installation on wall - surface mounted.
  • Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content). Glass diffuser: sandblasted.
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders that are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components that have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP65.
  • In compliance with EN 60598-1 standards.
  • Class of insulation: I.
  • Installation: wiring through M16 plastic cable gland (4,5mm<Ø<10mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland.


Available Colors for this Version
1. white 6. grey
3. anthracite 4. black
18. deep brown
Warnings
Wall
Memi Mid-Power LED / Sandblasted Glass

Light Flux
Placement
Product Code Details
4927800
Light Source
WARM WHITE 3000K MID-POWER LEDs 15W/220÷240V
Total power 18W
LED lm 2307 ≠ OUTPUT lm 1095
CRI>80

Integral electronic power supply
 

Download ENERGY LABEL

Photometry Image not Available Download Photometry:
4927800_MID-LED_20170314.IES 4927800_MID-LED_20170314.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Memi_manual.pdf

Download Technical Drawing: memi.dwg

Accessories

Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66