Product Sheet

Download PDF



  • Luminaire for installation on wall and on post - surface mounted.
  • Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content). Diffuser: lens or transparent or sandblasted glass fixed to the structure through a robotic gluing system.
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders that are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components that have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP65
  • In compliance with EN 60598-1 standards
  • Class of insulation: I
  • Installation: wiring through two cable holders (8mm<Ø<13mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable holder. For watertightness to be assured the use of a multicore cable is mandatory, the use of single unipolar cables is not allowed.

Available Colors for this Version
1. white 6. grey
3. anthracite 4. black
18. deep brown
Leo80 Power LED / Unidirectional - Medium Beam 40°

Light Flux
Product Code Details
Light Source
WARM WHITE 3000K POWER LED 1,1W/100÷240V
Total power 2,5W
LED lm 139 ≠ OUTPUT lm 26

Integral electronic power supply


Photometry Image not Available Download Photometry:
12311650_LED-1_20170314.IES 12311650_LED-1_20170314.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Leo_manual.pdf

Download Technical Drawing: leo80.dwg


Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66