- Adjustable projector for installation on wall or on pole.
- Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). Glass diffuser: extra-clear, fixed to the frame through a robotic gluing system.
- Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
- Protection rating: IP65.
- In compliance with EN60598-1 standards.
- Class of insulation: I.
- Installation: wiring through an M16x1.5 metal cable gland (4,5mm<ø<10mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland.
Available Colors for this Version
|1. white||6. grey|
|3. anthracite||4. black|
|18. deep brown|
NATURAL WHITE 4000K POWER LEDs 4,4W/100÷240V
Total power 7W
LED lm 456 ≠ OUTPUT lm 381
Integral electronic power supply
Code: 136Ground spike
H 200 mm
Code: 157Wall bracket
Code: 158Wall bracket
Code: 237SPD: (Surge Protection Device) 275Vac
Maximum discharge current 10KA (8/20µs)