Product Sheet

Download PDF

540001.A

Kirk

  • Adjustable projector for installation on ceiling, wall or floor.
  • Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content) and AISI 316L fixing plate. Glass diffuser: extra clear with silkscreen border, fixed to the aluminium through a robotic gluing system. The wiring unit and the emitting unit are connected by an adjustable junction.
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP65.
  • In compliance with EN60598-1 standards.
  • Class of insulation: I.
  • Installation: the luminaire is for direct connection to 220- 230V with a LED module set to work directly connected to the mains. The luminaire is equipped with an AISI316L stainless steel fixing plate for installation on surface and IP68 connector (6<Ø<8mm cable). Ground spike available on request.


Available Colors for this Version
1. white 6. grey
3. anthracite 4. black
18. deep brown
Warnings
Projector
Kirk70 CoB LED / Adjustable - Wide Beam 50° - Direct 230V

Light Flux
Placement
Product Code Details
540001.A
Light Source
WARM WHITE 3000K CoB LED 4,5W/220÷240V
Total power 6W
LED lm 350 ≠ OUTPUT lm 244
CRI >80

Led module set up to work directly connected to the mains
 

Download ENERGY LABEL

Photometry Image not Available Download Photometry:
540001_COB-LED-1-230V_20180405.IES 540001_COB-LED-1-230V_20180405.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Kirk_manual.pdf

Download Technical Drawing: kirk70.dwg

Accessories

Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66

Code: 264

Ground Spike Ø 70