Product Sheet

Download PDF

94188131

Cielo

  • Linear luminaire for installation in ground or ceiling - recessed.
  • Configuration: extruded aluminium body and die-cast double closing end on each side. Glass diffuser: 8mm thick transparent or sandblasted with silkscreen border, fixed to the aluminium body through a robotic gluing system.
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP67
  • In compliance with EN 60598-1 standards
  • Class of insulation: fluorescent lamp: II; LED module: I; RGB module: II
  • Installation: the electrical components are installed on a removable frame. Wiring through two plastic M20 cable glands (6<ø<12mm cables) placed on one of the two closing ends where a plastic box allows connection to the removable electric module. RGB version: the luminaire is equipped with two pieces of cable for an easy-to-make connection. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Installation requires a dedicated box to be ordered separately. It is important to provide a >200mm gravel layer or a drain system (for concrete surfaces) to ensure good drainage and to avoid water stagnation.
  • We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.


Available Colors for this Version
6. grey
Warnings
Ground Recessed
Ceiling Recessed
Cielo Power LED / L 1245 mm - Transparent Glass - Adjustable Optic - Elliptical Beam

Light Flux
Placement
Product Code Details
94188131
Light Source
NATURAL WHITE 4000K POWER LEDs 26,4W/220÷240V
Total power 32W
LED lm 3120 ≠ OUTPUT lm 2503
CRI >80

Integral electronic power supply
 

Download ENERGY LABEL

Photometry Image not Available Download Photometry:
94188131_LED-24_20170314.IES 94188131_LED-24_20170314.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Cielo_manual.pdf
ARES_acc81-82_manual.pdf

Download Technical Drawing: cielo-l1245.dwg

Accessories

Code: 72

Box for installation

1425 ±2mm x 95 H 95 mm

Code: 82

Frame for recessed installation on ceiling

1270 x 100 x H8 mm

Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66