Product Sheet

Download PDF



  • Round luminaire for installation in the ceiling - recessed.
  • Configuration: die-cast aluminium structure, EN AB- 47100 alloy (low copper content) and AISI 316L stainless steel outer frame (raw or painted in white). Glass diffuser: textured with silkscreen border, fixed to the aluminium structure through a robotic gluing system.
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP66
  • In compliance with EN60598-1 standards
  • Class of insulation: II; version 230V: I
  • Installation: the luminaire is equipped with a watertight M12 screw-connector providing optimal insulation against water ingress. 220-240V version: the luminaire is supplied with a remote IP67 electronic power supply kit equipped with a piece of cable with screw connector towards the luminaire and a piece of cable to be used for wiring. 230V direct feeding: the luminaire is equipped with a piece of cable with a 2-way connector for 3-conductor cables (H2O STOP) for an easy-to-make connection. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland / connector.
  • We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.

Available Colors for this Version
0. Inox
Ceiling Recessed
Leila135 CoB LED / Stainless Steel Frame - Medium Beam 30° (Leila Direct 230V)

Light Flux
Product Code Details
Light Source
WARM WHITE 3000K CoB LED 10W/220÷230V
Total power 12W
LED lm 951 ≠ OUTPUT lm 687
CRI >80

Led module set up to work directly connected to the mains


Photometry Image not Available Download Photometry:
536061_COB-LED-1-230V_20170314.IES 536061_COB-LED-1-230V_20170314.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Leila_manual.pdf

Download Technical Drawing: leila135.dwg


Code: 197

Metal installation box for concrete ceiling

296 X 201 H 125 mm

Code: 215

3/4 way terminal block 3 poles IP68

(Ø 5,5÷12 mm cable)

Code: 236

2 way terminal block 3 poles IP68

(Ø 5,5÷12 mm cable)

Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66