Product Sheet

Download PDF

532002

Zefiro

  • Cylindrical bollard light.
  • Configuration: die-cast aluminium cap, EN AB-47100 alloy (low copper content) and extruded aluminium pole. Polycarbonate diffuser: Transparent and UV-stabilised.
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP65
  • In compliance with EN 60598-1 standards
  • Class of insulation: II
  • Installation: the luminaire is equipped with a piece of cable with a 2-way connector for 3-conductor cables for an easy to make connection. We recommend installation on a concrete basement or surface, directly with bolts or through a dedicated fixing plate (to be ordered separately). Outdoor use requires suitable flexible cables.
  • We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.


Available Colors for this Version
1. white 6. grey
3. anthracite 4. black
18. deep brown
Warnings
Bollard
Wall
Zefiro Mid-Power LED / H.200mm

Light Flux
Placement
Product Code Details
532002
Light Source
NATURAL WHITE 4000K MID-POWER LEDs 14W/220÷240V
Total power 17W
LED lm 1937 ≠ OUTPUT lm 1494
CRI >80

Integral electronic power supply
 

Download ENERGY LABEL

Download Photometry:
532002_MID-LED_20170314.IES 532002_MID-LED_20170314.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Zefiro_manual.pdf
ARES_acc21-109_manual.pdf
ARES_acc185_manual.pdf

Download Technical Drawing: zefiro-h200.dwg

Accessories

Code: 21

Base plate and pole fixing bolts

174 x H 200 mm

Code: 185

High resistance in-ground fixing base

Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66

Code: 215

3/4 way terminal block 3 poles IP68

(Ø 5,5÷12 mm cable)