Product Sheet

Download PDF

502003

Sandro

  • Bollard light
  • Configuration: extruded aluminium structure. Polycarbonate diffuser: satin UV-stabilised.
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP65
  • In compliance with EN 60598-1 standards
  • Class of insulation: II
  • Installation: the luminaire is equipped with a piece of cable and a wiring kit with crimp connectors and an adhesive heat-shrink tubing for a watertight electrical connection. The use of a corrugated tube (Ø 30-50mm) allows an easier connection to the line. We recommend installation on a concrete basement or surface, directly with bolts or through the dedicated fixing plate (to be ordered separately). Outdoor use requires suitable flexible cables.
  • We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.


Available Colors for this Version
1. white 6. grey
3. anthracite 4. black
18. deep brown
Warnings
Bollard
Sandro Power LED / H. 900 mm

Light Flux
Placement
Product Code Details
502003
Light Source
WARM WHITE 3000K POWER LEDs 5,5W/100÷240V
Total power 8W
LED lm 600 ≠ OUTPUT lm 321
CRI >80

Integral electronic power supply
 

Download ENERGY LABEL

Photometry Image not Available Download Photometry:
502003_LED-5_20180703.IES 502003_LED-5_20180703.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Sandro_manual.pdf
ARES_acc138_manual.pdf

Download Technical Drawing: sandro-h900.dwg

Accessories

Code: 138

Base plate and fixing bolts

180 x 60 x H 170 mm

Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66