Product Sheet

Download PDF

527003

Hyperion

  • Rectangular luminaire for installation on wall - surface mounted.
  • Configuration: die-cast aluminium structure, EN AB- 47100 alloy (low copper content), stainless steel bracket and transparent polycarbonate emitting unit. Optional accessory: aluminium reflector (fixed by a double-sided technical tape)
  • Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders that are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components that have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
  • Protection rating: IP65
  • In compliance with EN60598-1 standards
  • Class of insulation: II; 24V version: III
  • Installation: the luminaire is equipped with a piece of neoprene cable (approx. 200mm) for an easy-to-make connection. Direct screwing on surface through the stainless steel bracket.
  • We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.


Available Colors for this Version
1. white 6. grey
3. anthracite 4. black
18. deep brown
Warnings
Wall
Bollard
Hyperion Mid-Power LED

Light Flux
Placement
Product Code Details
527003
Light Source
WARM WHITE 3000K MID-POWER LEDs 6W/220√∑240V
Total power 10W
LED lm 795 ≠ OUTPUT lm 398
CRI >80

Integral electronic power supply
 

Download ENERGY LABEL

Photometry Image not Available Download Photometry:
527003_MID-LED_20181018.IES 527003_MID-LED_20181018.LDT
Installation Data Sheets (of the product and of its accessories) ARES_Eclipse.Hyperion_manual.pdf

Download Technical Drawing: hyperion.dwg

Accessories

Code: 160

Satin alluminium carter

Tickness 0.5 mm

Code: 237

SPD: (Surge Protection Device) 275Vac

Maximum discharge current 10KA (8/20µs)
Maximum operating current 5A
Suitable for series connection - IP66

Code: 245

Pole

H 500 mm